GRIND X 36″ MOUNT STRIP
3″x3″x36″x 5/8″ holes GRIND Universal Mount Strip. Available in black or green finish.
*****Please order the 3x3x5/8″ dip bar when ordering the mount strip and dip bar together*****
The accessory bar can be positioned horizontally or vertically depending on the function required. Can be used with a pull-up bar, dip bar or storage for plates.
*****Please order the 3x3x5/8" dip bar when ordering the mount strip and dip bar together*****
- Brand: GRIND Fitness Equipment
- Made in USA: Rahway, New Jersey
- Color: Green
- Product Weight: 12.5 pounds
- Length: 36’’
- Width: 3’’
- Other Product Specs: 3”x3” 11-guage steel tube.
Additional notes: Hardware for mounting to wood studs included.
The 36” 3x3 Strip includes:
- (1) 5/8" x 4" detent pin
- (4) 3/8" x 1-1/2" Wood Lags for mounting to a stud
- (4) Oversized Holes on front to allow for easy tightening of the lags
- Wallmount Hole Spacing: 8” on-center (top and bottom), 16” on-center (middle holes)
- Hole Spacing along sides: 2” on-center
- Laser-Cut Grind branding
|Dimensions||40 × 4 × 4 in|
Anonymous (verified owner) –
Actually impressed by the quality. Finish and laser cuts are great. Would have been a 5 except there is a considerable amount of rust on the inside of the beam already.
admin (store manager) –
Thank you for your review, What you’re most likely seeing is the result of the acid bath and sealer that is applied during the powder coating process. Since its inside the tube the powder doesn’t spread well leaving the burnt rust looking areas that develop during the cleaning process. I can assure you that item will never rust out.
Chris Shaud (verified owner) –
Michael Stuesse (verified owner) –
Michael L. (verified owner) –
Very solid, well made. Nice that it comes with a pin. Would have preferred lag bolts that are a little longer, but with four of them it’s quite sturdy.